Zhermack Elite Hd+ Soft Putty Normal Set 4 x 450ML

Zhermack Elite Hd+ Soft Putty Normal Set:

• Delivery system: Manual mixing or 5:1 automatic mixing
• Recommended technique: Double step impression
• Type of setting: Normal Set
• Working time, including mixing time*(min:s): 2:00
• Time in mouth*(min:s): 3.30
• Setting time*(min:s): 5.30
• Elastic recovery: > 99 %
• Linear dimensional change (after 24 h): < 0,20 %
• Hardness (Shore A): 60 ± 2
• Shelf-Life: 3 years

Temperature:

• These times are intended from the start of mixing at 23°C/73°F. Higher temperatures reduce these times, lower temperatures

• All standard and/or special trays can be used, provided they are rigid and non-deformable. The range of Zhermack’s Hi-Tray impression trays are especially recommended. Proper adhesion of the material to the impression tray is essential to avoid errors, especially during removal from the mouth. To ensure a strong bond, make sure that the adhesive is appropriate for the type and material of the tray.
• Take the 2 components out of the tubs using the colour coded dosing spoons.
• Mix identical proportions of Base and Catalyst; until you obtain a homogeneous mix, with no streaks (about 30 sec.). Then place into the impression tray.
• Contact with latex gloves may prevent polysiloxanes from hardening. Avoid direct or indirect contact with latex gloves, Instead, wash your hands well to eliminate all traces of impurities or use vinyl gloves

• Hydrocompatibility - Hydrocompatible materials flow readily over the surface of the teeth and along preparation margins, making it possible to capture the details required for an accurate impression.
• Thixotropy - They flow over the surfaces they are positioned on and do not run once they have been positioned in the patient’s mouth.
• High tear resistance
• At least 99% elastic recovery
• Ideal working time/setting time ratio
• Hydrocompatibility - Hydrocompatible materials flow readily over the surface of the teeth and along preparation margins, making it possible to capture the details required for an accurate impression.
• Thixotropy - They flow over the surfaces they are positioned on and do not run once they have been positioned in the patient’s mouth.
• High tear resistance
• At least 99% elastic recovery
• Ideal working time/setting time ratio