Waldent FlexiGum Heavy Body A-Silicone Impression Material

• Working Time: 2 min
• Setting time in Mouth: 3min 30s
• Hardness Shore A: ≈67

• Slide up the lever present on the back side of the dispenser & simultaneously pullback the plunger.
• Lift up the plastic flap (Cartridge Lock) present on the front side.
• Now load the cartridge, ensuring that V-shaped notch of the cartridge is facing downwards.
• Push down the plastic flap and lock the cartridge.
• Remove the cartridge cap by rotating it to 90 degrees anticlockwise and discard it.
• Attach mixing tip and turn it clockwise to lock it.
• Before applying the tip, check that the openings of the cartridges are not clogged, and express the cartridge until the base and catalyst paste are evenly extruded.
• By pulling the trigger, material comes out mixed; while using it for the first time squeeze out a pea sized amount of material and discard it.
• To avoid bubbles, it is important that the tip of mixing tip always remains immersed in the material.

Single Step Technique for Implantology

• Begin by injecting the FlexiGum heavy body material onto the tray.
• Proceed to take the impression using the prepared tray.
• Carefully and accurately place the tray with the Heavy Body into the patient’s mouth.
• Once the material is fully cured, delicately remove the tray, ensuring a smooth and precise impression.

Double Step Technique

Recommended for all clinical restoration, crowns, bridges, inlays, overlays and implants.

• Begin by injecting the FlexiGum heavy body material onto the tray.
• Gently place the tray with Heavy Body into the patient’s mouth, ensuring accurate positioning in a single
step.
• Allow the material to solidify completely for 3 minutes and 30 seconds.
• Delicately withdraw the tray.
• Following the first impression, inject the Light Body material to capture detailed impressions for optimal
results.

• Exceptional hydrophilicity for precise impressions.
• Combines with light body for high-detail reproduction.
• Good mixing quality to avoid bubbles.
• High dimensional stability for reliable results.
• Stable even after disinfection procedures.
• Suitable working and setting time ensure high clinical efficiency
• Exceptional hydrophilicity for precise impressions.
• Combines with light body for high-detail reproduction.
• Good mixing quality to avoid bubbles.
• High dimensional stability for reliable results.
• Stable even after disinfection procedures.
• Suitable working and setting time ensure high clinical efficiency