Waldent Alchem Nanoflow Zirconium Flowable Composite

Rs. 350.00

Flowable Composite: A1

A1
A2
A3
A3.5
B1
Add to Wishlist
Specifications
Care Instruction
Features
  • Diametric Tensile Strength 52,4 MPa
  • Degree of conversion 83%
  • Flexural modulus 12,6 GPa
  • Shrinkage forces 0,91 MPa
  • Diamond pyramid hardness 78 kg/mm²
  • Thermal expansion coefficient 22 µm/m°C
  • Flexural strength Nanoflow composite - 85 Mpa
  • Compressive strength Nanoflow composite - 200 Mpa
  • Isolation: A rubber dam is the preferred method of isolation.
  • Cavity preparation: Prepare cavity with minimal tooth reduction.
  • Apply Etchant Gel to enamel and dentin surfaces for 15 seconds. Rinse thoroughly for 15 seconds with water.
  • Dry with clean, oil-free, air without desiccating the dentin.
  • Do not allow the etched surface to become contaminated with saliva or blood during the bonding procedure.
  • Adhesive: Immediately after blotting, apply 2-3 consecutive coats of adhesive to etched enamel and dentin for 15 seconds with gentle agitation using a fully saturated applicator. Remove excess solvent by gently drying with dry air for at least 5 sec to ensure a uniform glossy surface. Light cure for 20-30 seconds.
  • Apply the material with the applicator tip directly in the cavity and pre-contour with a suitable instrument.
  • The layer should not be thicker than 2mm.
  • Light cure for 40 sec using a standard curing light.
  • It has high radiopacity and mechanical strength
  • Superior wear resistance
  • High filler load
  • Flowable consistency
  • Low shrinkage
  • Excellent colour stability
  • Excellent flexural strength.
  • It has high radiopacity and mechanical strength
  • Superior wear resistance
  • High filler load
  • Flowable consistency
  • Low shrinkage
  • Excellent colour stability
  • Excellent flexural strength
Ask a Question
SKU:
Availability : In Stock Pre order Out of stock
Categories: consumables Waldent
Tags: Product

Share On

Description

Waldent Alchem Nanoflow Zirconium Flowable is an excellent flowable composite that delivers high strength & wears resistance. It is characterized by optimum surface affinity and penetrates easily into the most difficult areas. It combines esthetics as well as flow-on-demand handling for use.

Indications:

Waldent Alchem Nanoflow Zirconium Flowable

  • Indicated for direct filling of class V (Cervical Caries)
  • Root erosions
  • Wedge-shaped defects
  • Fillings of anterior teeth (Class III & IV)
  • Small fillings in posterior teeth
  • Block out of undercuts
Additional Information
Flowable Composite

A1, A2, A3, A3.5, B1

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)