Vincismile Trusfil-flow Flowable Composite

Rs. 800.00

Size: A1

A1
A2
A3
B1
B2
OA2
Add to Wishlist
Specifications
Care Instruction
Features
  • Flexural Strength (MPa): 103.56 (Standard Deviation: 4.14)
  • Flexural Modulus (GPa): 5.30 (Standard Deviation: 0.15)
  • Depth of Cure (10 seconds): 2.8 mm (Standard Deviation: 0.22)
  • Rheology/Flowability: Controlled Flow
  • Mimicking Nature (Florescence): Yes
  • Shelf Life: 3 years

Operation Instruction:

  • Cleaning cavity
  • Optional phosphoric etching
  • Use of dental adhesive
  • Light cure for 10s
  • Flowable resin for base (light cure)
  • Filling with light-cure composite resin
  • Adjustment, final light cure, polish, trim, finished

Prepare the Cavity:

  • Begin by cleaning the cavity thoroughly to remove any debris or bacteria.
  • Optionally, perform phosphoric etching if needed for enhanced adhesion.

Apply Dental Adhesive:

  • Apply an appropriate dental adhesive according to the manufacturer's instructions. Ensure complete coverage within the prepared cavity.

Light Cure:

  • After applying the adhesive, use a dental curing light to cure the adhesive layer for the recommended time (typically around 10 seconds). This step promotes bonding strength.

Flowable Resin Application:

  • Apply TrusFIL-Flow Flowable Composite Restorative within the cavity as needed for base or liner purposes. Ensure even distribution and coverage.

Light Cure Flowable Resin:

  • Use the dental curing light to cure the applied flowable resin. Follow the recommended curing time for optimal results.

Fill with Composite Resin:

  • Proceed to fill the remaining cavity space with a light-cure composite resin suitable for restorative purposes. Ensure proper adaptation and contouring.

Adjustment:

  • After filling the cavity, adjust the restoration as necessary to achieve the desired shape, contour, and occlusion. Use appropriate dental instruments for shaping and smoothing.

Final Light Cure:

  • Once adjustments are made, perform a final light cure using the dental curing light. Ensure adequate curing time to achieve full polymerization and strength.

Polish and Trim:

  • After curing, polish the restored surface using dental polishing instruments to achieve a smooth and esthetic finish. Remove any excess material and trim as needed for optimal restoration contour.

Finish:

  •  Complete the procedure by ensuring the restoration meets functional and esthetic standards. Check occlusion, polish again if necessary, and provide aftercare instructions to the patient.
  • Nanostructured filler for excellent polishability.
  • Impressive physical and chemical properties ensure durability.
  • Good rheology for easy control during application.
  • Multiple shades available for ideal aesthetic effect.
  • X-ray radiopacity/radiation resistance over 300%.
  • Mimics natural fluorescence for seamless integration.
  • Controlled flow for accurate placement.
  • Easy to use and compatible with composite resin.
Ask a Question
SKU:
Availability : In Stock Pre order Out of stock
Categories: Best Sellers consumables Home page Vincismile

Share On

Description

TrusFIL-Flow Flowable Composite Restorative is a dental material designed for various restorative procedures, ranging from minimally invasive cavity repairs to esthetic indirect restoration repairs. Its indications encompass a wide range of applications, including restoring carious lesions, serving as a base or liner under direct restorations, repairing small defects in esthetic indirect restorations, acting as a pit and fissure sealant, facilitating undercut blockout, and mending resin and acrylic temporary restorations.

One of the standout features of TrusFIL-Flow is its nanostructured filler loading, which contributes significantly to its exceptional polishability and long-lasting shine appearance. This characteristic not only enhances its aesthetic appeal but also ensures durability post-curing. The material boasts impressive physical and chemical properties, such as a flexural strength of 103.56 MPa and a flexural modulus of 5.30 GPa, guaranteeing structural integrity and resilience.

TrusFIL-Flow's controlled flow rheology makes it easy to manipulate and control accurately during application. It exhibits self-leveling properties, enabling it to achieve a perfectly flat plane, crucial for optimal restorative outcomes. The availability of multiple shades further enhances its aesthetic versatility, ensuring seamless integration with natural tooth coloration.

Additionally, TrusFIL-Flow offers remarkable X-ray radiopacity and radiation resistance, exceeding 300%, which is essential for diagnostic clarity and longevity. Its mimicking of natural fluorescence adds another dimension to its aesthetic appeal, blending seamlessly with the surrounding tooth structure.

Indications:

  • Restoration of minimally invasive cavity preparations
  • Base/liner under direct restorations
  • Repair of small defects in esthetic indirect restorations
  • Pit and fissure sealant
  • Undercut blockout
  • Repair of resin and acrylic temporary restorations

Advantages:

  • Nanostructured filler for excellent polishability and shine
  • Impressive physical and chemical properties for durability
  • Good rheology for easy control and self-leveling
  • Multiple shades for aesthetic effect
  • X-ray radiopacity/radiation resistance over 300%
  • Mimicking natural fluorescence
Additional Information
Size

A1, A2, A3, B1, B2, OA2