Vincismile Perfit A-Silicone Gingival Mask

• Type: Addition-curing silicone
• Intended Use: Reproducing gingival morphology in implant and fixed denture restorations
• Mixing Ratio: 1:1 (Base:Catalyst)
• Working Time: 1 minute 30 seconds
• Setting Time: 10 minutes
• Storage Temperature: 5-25℃ (Recommended)
• Shelf Life: 2 years

Hardness Options:

• Shore A 70 (Scannable)
• Shore A 40

Preparatory Work:

• Apply separating agent to the impression part of the gingiva that will be duplicated.

Mixing of Material:

• Insert the A-Silicone for Gingival Mask into a dispenser and close the localizer.
• Attach the mixer to the bio-cartridge of the product.
• Inject the silicone material onto the area to be duplicated until it begins to cure.

Perfuse Model:

• Once the A-Silicone for Gingival Mask is cured (8-10 minutes), pour well-mixed liquid plaster into the impression.
• Duplicate the impression by allowing the plaster to cure.

Instructions for C-Silicone for Laboratory/A-Silicone for Laboratory:

For Prosthesis or Denture Base:

• Mix and apply the silicone onto the surface of the prosthesis or wax pattern denture base.
• Remove wax and fill in the denture base material after silicone curing.
• Adjust and polish the denture base as needed.

For Partial Denture:

• Mix and apply the silicone onto the surface of the prosthesis or wax pattern denture base.
• Remove silicone and acrylic teeth after curing.
• Brush binding agent on teeth surfaces and reset them on the silicone impression.
• Fill in denture base resin and cure according to the molding process.

Storage Conditions:

• Seal and store the product in a cool place with a temperature range of 5-25℃.

Shelf Life:

• The shelf life of the product is 2 year

• Synthetic rubber composition for precise replication
• Non-reversible duplicating material for accuracy
• Full or partial model duplication support
• Easy mixing and application process
• Suitable for prosthesis and denture base
• Long-lasting storage stability
• Comprehensive precautions for safe usage
• Synthetic rubber composition for precise replication
• Non-reversible duplicating material for accuracy
• Full or partial model duplication support
• Easy mixing and application process
• Suitable for prosthesis and denture base
• Long-lasting storage stability
• Comprehensive precautions for safe usage