Vincismile Perfit A-Silicone Elastomeric Impression Material

Putty (Normal Set):

• Mixing Time: 30s
• Total Working Time: 1min30s
• Setting Time in oral cavity: 3min
• Elastic recovery: >99.5%
• Dimensional change rate: <0.2%
• Hardness Shore A: ≈67
• Shelf Life: 2 Years

Light Body Cartridges:

• Total Working Time: 2min15s
• Setting Time in the oral cavity: 3min30s
• Elastic recovery: >99.5%
• Dimensional change rate: <0.2%
• Hardness Shore A: ≈56
• Shelf Life: 2 Years

Regular Body Cartridges:

• Working Time: 1min30s
• Setting Time in the oral cavity: 3min
• Shore A Hardness: 62
• Recovery from deformation: >99.5%
• Linear dimensional change: <0.2%
• Colour: Transparent
• Shelf Life: 2 Years

Heavy Body Cartridges (Dispenser Mix):

• Total working time: 2min
• Setting time in oral cavity: 3min 30s
• Shore A Hardness: ≈68
• Shelf Life: 2 Years

Vincismile Perfit A-Silicone Putty (Normal Set)

• Preparation: Ensure the patient's teeth and surrounding area are prepared for the impression.
• Mixing Putty: Dispense equal lengths of both base and catalyst putty onto a mixing pad or a clean, disposable surface.
• Mixing Time: Immediately start mixing the base and catalyst putty together using gloved hands. Thoroughly knead and fold the putty until a uniform color is achieved. Ensure complete mixing within 30 seconds.
• Loading Tray: Once mixed, quickly load the putty onto the impression tray. Distribute the putty evenly across the tray to ensure full coverage of the impression area.
• Tray Placement: Seat the loaded tray firmly into the patient's mouth, ensuring it covers all teeth requiring impression. Instruct the patient to bite down gently but firmly to create the impression.
• Working Time: Complete tray placement within the total working time of 1 minute and 30 seconds to ensure optimal results.
• Setting Time: Allow the putty to set in the oral cavity for approximately 3 minutes. Avoid any movement or disturbance during this time to prevent distortion of the impression.
• Removal: After the setting time has elapsed, carefully remove the impression tray from the patient's mouth. Remove any excess material around the impression.
• Inspection: Inspect the impression for accuracy and completeness, ensuring all necessary details are captured.

Vincismile Perfit A-Silicone Light Body Cartridges

• Preparation: Prepare the patient's teeth and surrounding area for the impression.
• Load Cartridge: Insert the light body cartridge into the dispensing gun. Ensure it is securely attached.
• Extrude Material: Extrude a continuous bead of light body material onto the prepared impression tray. Ensure uniform coverage across the tray's impression surface.
• Tray Placement: Promptly place the loaded tray into the patient's mouth, ensuring it covers all teeth requiring impression. Instruct the patient to bite down gently but firmly to create the impression.
• Working Time: Complete tray placement within the total working time of 2 minutes and 15 seconds.
• Setting Time: Allow the material to set in the oral cavity for approximately 3 minutes and 30 seconds. Ensure the patient remains still during this time to prevent distortion of the impression.
• Tray Removal: After the setting time has elapsed, carefully remove the impression tray from the patient's mouth. Exercise caution to avoid disrupting the impression.
• Inspection: Inspect the impression for accuracy and completeness, ensuring all necessary details are captured.

Vincismile Perfit A-Silicone Regular Body Cartridges

• Preparation: Prepare the patient's teeth and surrounding area for the impression.
• Load Cartridge: Insert the regular body cartridge into the dispensing gun. Ensure it is securely attached.
• Extrude Material: Extrude the regular body material onto the prepared impression tray in a continuous bead. Ensure even coverage across the tray's impression surface.
• Tray Placement: Promptly place the loaded tray into the patient's mouth, ensuring it covers all teeth requiring impression. Instruct the patient to bite down gently but firmly to create the impression.
• Working Time: Complete tray placement within the total working time of 1 minute and 30 seconds.
• Setting Time: Allow the material to set in the oral cavity for approximately 3 minutes. Ensure the patient remains still during this time to prevent distortion of the impression.
• Tray Removal: After the setting time has elapsed, carefully remove the impression tray from the patient's mouth. Exercise caution to avoid disrupting the impression.
• Inspection: Inspect the impression for accuracy and completeness, ensuring all necessary details are captured.

Vincismile Perfit A-Silicone Heavy Body Dispenser Mix Cartridges (Normal Set)

• Preparation: Prepare the patient's teeth and surrounding area for the impression.
• Load Cartridge: Insert the heavy body dispenser mix cartridge into the dispensing gun. Ensure it is securely attached.
• Extrude Material: Extrude the heavy body material onto the prepared impression tray in a continuous bead. Ensure even coverage across the tray's impression surface.
• Tray Placement: Promptly place the loaded tray into the patient's mouth, ensuring it covers all teeth requiring impression. Instruct the patient to bite down gently but firmly to create the impression.
• Working Time: Complete tray placement within the total working time of 2 minutes.
• Setting Time: Allow the material to set in the oral cavity for approximately 3 minutes and 30 seconds. Ensure the patient remains still during this time to prevent distortion of the impression.
• Tray Removal: After the setting time has elapsed, carefully remove the impression tray from the patient's mouth. Exercise caution to avoid disrupting the impression.
• Inspection: Inspect the impression for accuracy and completeness, ensuring all necessary details are captured.

• Versatility: Tailored options for various clinical impression techniques.
• Hydrophilicity and Thixotropy: Excellent properties for accurate results and ease of use.
• Stability: Impressions remain stable for up to 28 days, allowing convenient storage.
• Professional Trust: Trusted by dental professionals for consistent and reliable performance.
• Range of Options: Available in Putty, Light Body, Regular Body, and Heavy Body cartridges.
• Putty Material: High tear strength and dimensional accuracy, suitable for tray material.
• Light Body: Low-viscosity material for wash impressions with high accuracy.
• Regular Body: Transparent and high viscosity, ideal for transparent matrices, saving clinical time.
• Heavy Body: High viscosity with advanced thixotropic characteristics, providing precise impressions, especially for implants.
• Versatility: Tailored options for various clinical impression techniques.
• Hydrophilicity and Thixotropy: Excellent properties for accurate results and ease of use.
• Stability: Impressions remain stable for up to 28 days, allowing convenient storage.
• Professional Trust: Trusted by dental professionals for consistent and reliable performance.
• Range of Options: Available in Putty, Light Body, Regular Body, and Heavy Body cartridges.
• Putty Material: High tear strength and dimensional accuracy, suitable for tray material.
• Light Body: Low-viscosity material for wash impressions with high accuracy.
• Regular Body: Transparent and high viscosity, ideal for transparent matrices, saving clinical time.
• Heavy Body: High viscosity with advanced thixotropic characteristics, providing precise impressions, especially for implants