Vincismile Luting-II Glass Ionomer Luting Cement

• Powder/Liquid Ratio(g/g): 1.6-1.8/1.0
• Mixing Time: 45s
  
• Working Time:2min10s
  
• Setting Time: 3min15s
  
• Film thickness: 13μm
  
• Compression Strength: >140Mpa
  
• Shelf Life: 2 Years

Tooth Preparation:

• Prepare the tooth following standard procedures.
• Clean the prepared tooth surface with pumice and water.
• Avoid over-drying; use short intervals of water and oil-free air or cotton pellets for drying.

Restoration Preparation:

• Ensure the restoration is pretreated and handled according to the manufacturer's instructions.

Powder and Liquid Dispensing:

• Use the recommended powder to liquid ratio:

1. Luting: 1.6-1.8g powder to 1.0g liquid
2. Filling: 2.3-2.5g powder to 1.0g liquid

• Dispense and mix on a pad within the specified time frame.

Mixing:

• Mix the powder and liquid thoroughly within 45 seconds.
• For larger amounts, divide the powder into two equal parts and mix sequentially.

Application for Luting:

• Apply the mixed cement to the prepared tooth/restoration.
• Form the contour during the setting time.
• Finish and polish as needed after setting.

Application for Filling:

• Follow the same mixing procedure as for luting.
• Apply the mixed cement to fill caries or defects.
• Finish and polish after setting.

Working Time and Setting:

• Working time varies based on the application (luting or filling).
• Net setting time ranges from 1 minute 30 seconds to 8 minutes (luting) and 1 minute 30 seconds to 6 minutes (filling) depending on the powder to liquid ratio.

Post-Application:

• For one-visit treatments, adjust contour, finish, and polish after initial set.
• Use standard techniques for finishing and polishing under water spray for standard methods.

Storage and Handling:

• Close bottles immediately after use.
• Store in a cool, dry place away from direct sunlight.
• Use only by dental professionals in recommended indications.

• Dual-functionality: luting and filling capabilities.
• Precise film thickness for accurate restoration.
• Enhanced durability and low stickiness.
• Time-saving with rapid net setting.
• Remineralization promotion for improved longevity.
• Antimicrobial properties for reduced reactions.
• Dual-functionality: luting and filling capabilities.
• Precise film thickness for accurate restoration.
• Enhanced durability and low stickiness.
• Time-saving with rapid net setting.
• Remineralization promotion for improved longevity.
• Antimicrobial properties for reduced reaction