SuperEndo Inlay Preparation Burs Kit

• Shank type - Friction grip
• Construction - Stainless steel Shank Coated with diamond particles
• Autoclavable upto 134°C 

Color band on shank:

• Regular - Blue
• Fine - Red
• Superfine - Yellow

Set Of 10 Piece 

• SI-48
• DI-42
• FO-22EF
• EX-21EF
• SF-21
• TF21F
• TF-31
• TF-22
• SF-21F
• EX-18F

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230'000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses. 
• After use, remove the bur to clean and sterilize according to protocol
• Do not use the bur if its bent or if the surface diamond coating has worn- off

• Durable Burs with multi-layer coating.
• Silicon inside hold burs tightly
• Full set autoclavable.
• Evenly distributed diamond particles
• Sturdy built
• Durable Burs with multi-layer coating.
• Silicon inside hold burs tightly
• Full set autoclavable.
• Evenly distributed diamond particles
• Sturdy built