SuperEndo Direct Cosmetic Veneer Burs Kit

Maximum recommended speed for the burs :

• Less than 450,000 rpm: 340S
• Less than 300,000 rpm: MI-2P, 121, 102R, F216, SF104R, SF215
• Less than 160,000 rpm: SF219

Set Of 8 Burs :

• MI-2P
• SF-215
• SF219
• 121
• 340S
• SF104R
• F216
• 102R

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230'000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.

• The Kit offers unique shapes of diamond points for depth orientation, minimally invasive cavity preparation and direct veneer preparation.
• The Diamond Points are hygienically organized in an aluminum bur block (autoclavable) for convenient sterilization and easy replacement.
• The Kit offers unique shapes of diamond points for depth orientation, minimally invasive cavity preparation and direct veneer preparation.
• The Diamond Points are hygienically organized in an aluminum bur block (autoclavable) for convenient sterilization and easy replacement.