Shofu Composite Finishing Kit

TECHNICAL SPECIFICATIONS:

• Dura-Green Stones

Recommended Rotation Speed-5,000 – 20,000 min-1
Maximum Permissible Rotation Speed - 30,000 min-1

Recommended Pressure - 3 – 5 N

• Dura-White Stones

RecommendedRotation Speed-5,000 – 20,000 min-1

Maximum Permissible Rotation Speed - 30,000 min-

Recommended Pressure -2 N

• Begin by selecting the appropriate abrasive stone. Make sure that the stone is the right size and shape for the area that needs to be contoured or finished.
• Use a high-speed handpiece with water spray to reduce heat generation and to help control debris.
• Place the abrasive stone on the composite filling and gently apply pressure in a back-and-forth motion. Use light pressure to avoid damaging the surrounding tooth structure.
• Pay close attention to the contour of the filling and use the abrasive stone to achieve the desired shape and size.
• When working on interproximal areas, use a thin abrasive disc or strip to avoid damaging the adjacent tooth surface.
• For subgingival areas, use a curved abrasive stone and work carefully to avoid damaging the gums.
• Rinse the area frequently with water to remove debris and keep the abrasive stone clean.
• Once you have achieved the desired contour and shape, switch to a finer abrasive stone or polishing system to achieve a smooth, glossy finish.
• After polishing, evaluate the restoration to ensure it matches the adjacent teeth in terms of contour, size, and shade.
• Finally, use a finishing bur to smooth any rough edges or sharp corners that may be present.

• Dura-Green silicon carbide stones for adjusting
• Dura-White aluminum oxide stones for fine finishing
• Contra-Angle and Friction-Grip kits
• Your choice of a sterilizable bur block or plastic kit
• Fine & smooth finisher & polishers
• Ideal to be used for finishing & polishing of composite restorations and GIC
• High durable abrasives
• Cost effective
• Vibration free performance
• Dura-Green silicon carbide stones for adjusting
• Dura-White aluminum oxide stones for fine finishing
• Contra-Angle and Friction-Grip kits
• Your choice of a sterilizable bur block or plastic kit
• Fine & smooth finisher & polishers
• Ideal to be used for finishing & polishing of composite restorations and GIC
• High durable abrasives
• Cost effective
• Vibration free performanc