ET Dental Implant Impression Trays (Pack of 10)

• Perforated Implant Impression Trays
• Disposable trays
• Colour - Blue
• Material - Plastic

 10 Impression Trays :

• Upper (Small)
• Lower (Small)
• Upper (Medium)
• Lower (Medium)
• Upper (Large) 
• Lower (Large)
• Left Upper,Right Lower (Quadrant)
• Right Upper,Left Lower(Quadrant)
• Anterior Upper
• Anterior Lower

• Place your open-tray impression coping on the implant you are planning to impress. Confirm its complete seating with a radiograph. There should not be a space at the junction of the implant and impression coping.
• Remove the corresponding section from the impression tray with the driver or bur.
• Try in the impression tray over the open-tray implant. Make sure that there is adequate space around the impression coping. If the impression coping is located between two sections, remove both.
• If the impression coping does not extend beyond the tray, the tray may be modified with wax. The impression coping must be accessible for removal of the open-tray (or pick-up) impression.
• There is no need to place adhesive into this impression tray. Undercuts are built into the tray, and the impression material will be secured to the tray through mechanical retention.
• Fill the impression tray with heavy-viscosity impression material and syringe light-viscosity impression material over the impression coping. Seat the tray. Allow the impression material to fully set, unscrew the impression coping, and retrieve your impression with your open-tray impression coping from the patient’s mouth.
• Remove the impression coping from the mouth and reposition it in the impression, checking that it relocates positively. There will usually be an audible or tactile “click”.
• Replace the healing abutment.

• Strong, rigid distortion free plastic construction
• Anatomically designed
• Smooth edges for patient comfort
• Excellent retention for impression materials whilst providing sufficient pressure for all details
• Base sections can be easily removed with a bur for implant posts
• Reduced thickness trim lines on labial wall for easy removal in inclination post cases.
• Strong, rigid distortion free plastic construction
• Anatomically designed
• Smooth edges for patient comfort
• Excellent retention for impression materials whilst providing sufficient pressure for all details
• Base sections can be easily removed with a bur for implant posts
• Reduced thickness trim lines on labial wall for easy removal in inclination post cases.