D-Tech 3D Accuprint Model Hard Dental 3D Printing Resin

Storage and Disposal:

• Store at room temperature and keep the cap tightly closed to prevent curing from ambient light.
• In its polymerized form, it can be disposed of in general waste. In its liquid state (uncured), it should be treated as chemical waste, following local disposal regulations

Preparation:

• Wear appropriate protective gear, including nitrile gloves, safety goggles, and protective clothing, to ensure safety during handling.
• Agitate or shake the resin bottle vigorously for at least one minute to ensure proper mixing. Avoid damaging the material tray film if you're using one.

Design of the Dental Model:

•  In most cases, dental models are designed and provided in STL file format by a dental-design service or lab after they receive intraoral scans from the patient. Ensure you have the 3D model file ready.

Printing Process:

• Position the 3D model design in the slicing software, ensuring that the teeth face away from the print platform and that the base lies flat on the print platform. Design appropriate support structures.
• Apply the printing settings recommended for Model Hard. Consult the printer manufacturer or the provided contact for these specific settings.
• Make sure the resin tank is securely attached and filled to the recommended resin level.
• Ensure the print platform is clean, dry, securely placed, and locked on the platform arm.

Post-Processing:

Cleaning:

• After printing is complete, detach the print objects from the build platform using the supplied spatula.
• Clean the printed object in a two-step process with isopropyl alcohol (IPA) using a cleaning bath.
• First, clean the print object for 2 minutes in a reusable IPA solution.
• Then, thoroughly clean the print object for 2 minutes using a fresh IPA solution.
• The entire cleaning process should not take longer than 5 minutes, as extended exposure to IPA could affect the print objects.

Post Curing:

• Remove support structures if they are present.
• Ensure the printed object is not deformed.
• Post-cure the cleaned print objects in a post-curing chamber to achieve the required material properties. Follow recommended curing profiles based on your equipment. For example, Asiga Flash Cure for 30 minutes or Ackuretta Curie for 10 minutes.

• High Hardness Models
• Specialized for Hollow Models
• Economical
• Fast Curing
• Low Odor
• Specially Designed for Dental Applications
• Color Options: Grey and Ivory
• High Hardness Models
• Specialized for Hollow Models
• Economical
• Fast Curing
• Low Odor
• Specially Designed for Dental Applications
• Color Options: Grey and Ivory