3m Espe Filtek Bulk Fill Flowable Restorative - Refills

• Composite Type: Bulk Fill Flowable
• Cure Type: Light Cure
• Delivery System: Capsule, Syringe
• Depth of Cure: 4mm
• Material Structure: Microhybrid Composite
• Shades: A2, A3

How to Use 3M™ Filtek™ Bulk Fill Flowable Restorative Capsules

Preparation:

Ensure the tooth is clean and dry. Use a rubber dam if necessary to isolate the area.

Apply retraction paste and clean the tooth surface thoroughly.

Etching:

Apply a phosphoric acid etchant to the prepared cavity for 15-30 seconds.

Rinse thoroughly with water and dry the tooth without desiccating it.

Bonding:

Apply a bonding agent according to the instructions.

Light-cure the bonding agent for the recommended time.

Warming (Optional):

Warm the capsules up to 70°C for up to one hour if desired.

Dispensing:

Attach the capsule to a dispensing gun.

Application:

Dispense the flowable restorative material directly into the cavity.

Use a dental instrument to ensure even distribution and fill the entire cavity space.

Layering:

For deep cavities, apply the material in increments up to 4mm in depth.

Ensure each layer is adequately cured before applying the next layer.

Curing:

Use a curing light to polymerize the material. Follow the recommended curing time.

Ensure the light covers the entire restoration area for uniform curing.

Finishing:

Once the final layer is cured, proceed with finishing and polishing the restoration.

Final Check:

Verify the occlusion and make any necessary adjustments.

Ensure the restoration is smooth and comfortable for the patient.

How to Use 3M™ Filtek™ Bulk Fill Flowable Restorative Syringe

Preparation:

Ensure the tooth is clean and dry. Use a rubber dam if necessary to isolate the area.

Apply retraction paste and clean the tooth surface thoroughly.

Etching:

Apply a phosphoric acid etchant to the prepared cavity for 15-30 seconds.

Rinse thoroughly with water and dry the tooth without desiccating it.

Bonding:

Apply a bonding agent according to the instructions.

Light-cure the bonding agent for the recommended time.

Warming (Optional):

Warm the syringe up to 70°C for up to one hour if desired.

Dispensing:

Remove the cap and attach a suitable dispensing tip to the syringe.

Application:

Slowly dispense the flowable restorative material directly into the cavity.

Use a dental instrument to ensure even distribution and fill the entire cavity space.

Layering:

For deep cavities, apply the material in increments up to 4mm in depth.

Ensure each layer is adequately cured before applying the next layer.

Curing:

Use a curing light to polymerize the material. Follow the recommended curing time.

Ensure the light covers the entire restoration area for uniform curing.

Finishing:

Once the final layer is cured, proceed with finishing and polishing the restoration.

Final Check:

Verify the occlusion and make any necessary adjustments.

Ensure the restoration is smooth and comfortable for the patient.

• Optimized Filler and Monomer Blend: Designed to maximize strength, wear resistance, and radiopacity while minimizing shrinkage.
• Low Viscosity: Ensures easy adaptation in deep restorations with little or no instrumentation.
• Low Shrinkage and Polymerization Stress: Intelligent selection of monomers and fillers produces a restorative with minimal shrinkage and stress during polymerization.
• Bulk Fill Capability: Can be used to perform bulk fill restorations with a depth of cure up to 4mm.
• Warming Tolerance: Capsules can be safely warmed up to 70°C for up to one hour, allowing for injection molding.
• Versatile Applications: Suitable for use as a bulk fill base or a low-stress liner in various restorative procedures.
• Radiopaque: Easily distinguishable on radiographs, aiding in diagnosis and follow-up.
• Excellent Handling Properties: Flowable consistency allows for precise placement and easy adaptation to cavity walls.
• Strong Bond: Provides durable adhesion when used with compatible bonding agents.
• Aesthetic Results: Offers good color stability and matches the natural tooth shade for pleasing aesthetic outcomes.
• Optimized Filler and Monomer Blend: Designed to maximize strength, wear resistance, and radiopacity while minimizing shrinkage.
• Low Viscosity: Ensures easy adaptation in deep restorations with little or no instrumentation.
• Low Shrinkage and Polymerization Stress: Intelligent selection of monomers and fillers produces a restorative with minimal shrinkage and stress during polymerization.
• Bulk Fill Capability: Can be used to perform bulk fill restorations with a depth of cure up to 4mm.
• Warming Tolerance: Capsules can be safely warmed up to 70°C for up to one hour, allowing for injection molding.
• Versatile Applications: Suitable for use as a bulk fill base or a low-stress liner in various restorative procedures.
• Radiopaque: Easily distinguishable on radiographs, aiding in diagnosis and follow-up.
• Excellent Handling Properties: Flowable consistency allows for precise placement and easy adaptation to cavity walls.
• Strong Bond: Provides durable adhesion when used with compatible bonding agents.
• Aesthetic Results: Offers good color stability and matches the natural tooth shade for pleasing aesthetic outcomes.